Project Basr: Pakistan And The Hunt For Zero Point (IV)

“Bob Lazar is Legit, even more than he realizes.”

– Lou Baldin


Part I, II, III

0.8: Gravity And The Creation Of Gravitational Field

Waves generated through a gravitational field. The prediction that an accelerating mass will radiate gravitational waves (and lose energy) comes from the general theory of relativity. Many attempts have been made to detect waves from space directly using large metal detectors.

The theory suggests that a pulse of gravitational radiation (as from a supernova explosion or black hole) causes the detector to vibrate, and the disturbance is detected by a transducer. The interaction is very weak and extreme care is required to avoid external disturbances and the effects of thermal noise in the detecting system. So far, no accepted direct observations have been made. However, indirect evidence of gravitational waves has come from observations of a pulsar in a binary system with another star. One device used to make measurements like this is an atomic clock and the most recent atomic clock is supposed to not vary more than 1 second in every 1 million years. And, up until this point in time, great mass such as a star, planet, or moon was the only source of a discernible gravitational field that we were aware of. So, just as the gravitational field around great mass, such as a planet, distorts space and time, any gravitational field, whether naturally occurring or generated, distorts space and time in a similar manner.

We know that gravity bends or distorts space/time and light by virtue of the fact that we’re able to see stars which we know should be blocked from our view by the sun. We’ve used radio and optical telescopes to map stars and other celestial bodies during the course of our yearly orbit around the sun, so we know where these celestial bodies should be. When the sun is between us and a star, many times we can still see the star as though it were in a different position. We know that gravity distorts time by virtue of the fact that if we take two devices which measure minute variations in time, and we keep one at sea level and take the other to a high altitude, when we compare them again, they reflect different times. The difference in this passage of time is caused by the fact that a gravitational field weakens the further one get from the source, and of course in this instance, the source of the gravitational field is the earth. So the one device which was taken to the high altitude was exposed to a less powerful gravitational field than the device which we kept at sea level.

Up until this point in time, the term generate has been used to describe the capability of producing a gravitational field, but since there is no known way of creating a gravitational field from nothing, a more accurate term might be to access and amplify a gravitational field. To understand how gravity is generated or accessed and amplified, one must first know what gravity is. Gravity is a wave. Not a particle that acts like a wave, but a real wave. The fact that gravity is a wave has caused mainstream scientists to surmise numerous sub-atomic particles which don’t actually exist and this has caused great complexity and confusion in the study of particle physics.

Gravity is a wave and there are two different types of gravity. Gravity A and gravity B. Gravity A works on a small or micro scale and gravity B works on a larger or macro scale. We’re familiar with gravity B, it is the big gravity wave that holds the earth, as well as the rest of the planets in orbit around the sun and holds the moon, as well as man-made satellites, in orbit around the earth. We’re not familiar with gravity A. It is the small gravity wave which is the major contributory force that holds together the mass that makes up all protons and neutrons. One must have at least an atom of a substance for it to be considered matter. One must have at least a proton and an electron and in most cases a neutron to be considered matter. Anything short of an atom such as the up quarks and down quarks which make up protons and neutrons; or protons, neutrons, or electrons, individually are considered to be mass and do not constitute matter until they form an atom. That’s why it’s said that gravity A holds together the mass or the “stuff” that makes up protons and neutrons. Once an atom is formed, the electromagnetic force is also a substantial factor.

Gravity-A is what is currently being labeled as the strong nuclear force in mainstream physics and gravity A is the wave that one need to access and amplify to enable one to cause the space/time distortion required for “practical” interstellar travel. Locating gravity A is found in the nucleus of every atom of all matter here on earth and the universe. Accessing gravity A with the naturally occurring elements found on earth is a big problem. Remember that gravity A is the major force that holds together the mass that makes up protons and neutrons and other sub-atomic particles. This means the gravity A that we are trying to access is virtually inaccessible because it is located within matter we have here on earth. Our solar system has one star, which is our Sun. But the majority of solar systems in our Milky Way galaxy are binary and multiple star systems which have more than one sun. However, the earth is not representative of all matter within our universe. The two main factors which determine what residual matter remains after the creation of a solar system are the amount of electromagnetic energy and the amount of mass present during the solar system’s creation.

Many single star solar systems have stars that are so large that our Sun would appear to be a dwarf by comparison. Keeping all this in mind, it should be obvious that a large, single star system, binary star system, or multiple star systems would have had more of the prerequisite mass and electromagnetic energy present during their creations. This makes it possible for these systems to possess elements which are not native to the earth. Scientists have long theorized that there are potential combinations of protons and neutrons which should provide stable elements with atomic numbers higher than any which appear on our periodic chart, though none of these super heavy elements occur naturally on earth. A “super heavy” element is any element with an atomic number over 110. Some elements heavier than uranium do occur on earth in trace amounts, but for the most part, we synthesize these heavier elements in laboratories. There are other elements that do not occur naturally on earth that a small group of the American government is experimenting with. It is called element 115 and it has two very unusual properties.

0.9: Lazar’s Gravity Generators

The following is the rubber sheet explanation of space-time manipulation by Bob Lazar.

Assuming they’re in space, they will focus the three gravity generators on the point they want to go to. Now, to give an analogy: If one take a thin rubber sheet, say, lay it on a table and put thumbtacks in each corner, then take a big stone and set it on one end of the rubber sheet and say that’s one’s spacecraft, one should pick out a point that one want to go to – which could be anywhere on the rubber sheet – pinch that point with your fingers and pull it all the way up to the craft. That’s how it focuses and pulls that point to it. When you then shut off the gravity generator[s], the stone (or spacecraft) follows that stretched rubber back to its point. There’s no linear travel through space; it actually bends space and time and follows space as it retracts. In the first mode of travel – around the surface of a planet – they essentially balance on the gravitational field that the gravity generators put out, and they can ride a “wave”, like a cork does in the ocean. In that mode they’re very unstable and are affected by the weather. In the other mode of travel – where they can travel vast distances – they can’t really do that in a strong gravitational field like Earth, because to do that, first of all, they need to tilt on their side, usually out in space, then they can focus on the point they need to with the gravity generators and move on. If one can picture space as a fabric, and the speed of light is one’s limit, it’ll take one so long, even at the speed of light, to get from point A to point B. One can’t exceed it – not in this universe anyway. Should there be other parallel universes, maybe the laws are different, but anyone that’s here has to abide by those rules.

Gravity Generator

Inside the reactor, Element 115 is bombarded with a proton which plugs into the nucleus of the 115 atom and becomes Element 116, which immediately decays and releases, or radiates, small amounts of antimatter. The antimatter is released into a tuned tube which keeps it from reacting with the matter that surrounds it. It is then directed toward a gaseous matter target at the end of the tube. The matter and antimatter collide and annihilate, totally converting to energy. The heat from this reaction is converted into electrical energy in a near 100% efficient thermoelectric generator…”

Gravity Generator_2

Element 115 is a super heavy element found probably on a planet of a binary star system. Supposedly the craft uses 223 grams, cut to a triangular shape, within the reactor structure, (in a cloud chamber it was shown to alter, by gravitational forces, the paths of released alpha particles).” The point here is what happens beyond the ‘gaseous matter target’ is what sort of energy field is established, is it an electric field (if so what polarity), or is it electromagnetic wave propagation, or is it a gravitational wave that is being produced… The point about Lazar’s central tube assembly is that he does not make mention of, is that it surely must be used as a circular cross-section waveguide for high-frequency waves. From his graphics it looks like an 8cm tube and that would relate to an electromagnetic wave in the microwave region (especially if the tube terminated at the top at a smaller diameter). And whatever the target is, hitting it with these microwaves most probably causes the molecules and atoms of the target ‘gases’ to resonate (as in electron spin resonance), the resonance then pulls the electrons up the energy bands and greatly increases their energy level.

UFO

The next point is that, according to Bob Lazar, speaking about one of the propulsion systems used by the UFO he worked on, “the craft does not create an ‘antigravity field’, as some have surmised: It’s a gravitational field that’s out of phase with the current one – it’s the same gravitational wave. The phases vary from 180 degrees to zero…in a longitudinal propagation.” So if, by analogy, we assume that the gravitational wave is similarly structured to that of a sinusoidal electromagnetic wave (there is some evidence to suggest that gravity waves are structured as an electromagnetic wave). What Bob Lazar seems to be saying is that by duplicating exactly this wave, and then propagating this duplicated wave back into the original, after altering its phase (so that – in relation to the existing gravity wave ‘force’ that is operating throughout this planet – the newly created wave matches it or differs from it) then the newly created gravity force can be made stronger or weaker than the existing one…

UFO_2

Additional point is that because it’s been puzzling me ever since we clapped eyes on his drawings, is that the ‘gravity wave generators’ radiate some sort of energy beam below the craft THROUGH THE SHELL CASING. Now call me old-fashioned but on this speck of the universe engineers just don’t do that sort of thing… Having said that however, (see) if the shell was constructed not of plain metal but of an ‘artificial’ metal (of an artificial metallized dielectric composition), and the electromagnetic waves being used were of small enough wavelength, radio waves of microwave length being particularly suitable, then just as Lazar has implied THE HULL OF THE CRAFT COULD BE USED AS A LENS for focusing the electromagnetic waves. Because with radio waves of very short wavelength it has long been established that they behave somewhat like light waves, in that they have what is termed “optical properties” meaning that these waves can be bent or flattened by a suitably constructed ‘lens’. Such a lens for a radio micro-wave is made not of glass but of metallized plates inter-spaced certain distances apart, which in this case would equate to around 10 – 50 mm apart. In this way the hull could be used as a very efficient waveguide, not merely to focus the beams but more advantageously to regulate their shape or to give a predetermined delay between one beam and another.

E-plane

This is how it could be done; whereas normal dielectrics have microscopic particles and interfaces, the ‘artificial dielectric’ can be made to have metal strips (or rods or spheres) of macro-scope size constructed into it in the form of a lattice. With this technique comes the added advantage that the strips or particles can be aligned to the orientation of the required electric fields. Of the two main types of structured ‘metallic lens’ the M-plane alignment retards the EM wave, and the E-plane alignment accelerates the wave (in the E-plane structure the metal strips are parallel to the plane of the electric field of the wave. Further, if the spacing between these parallel strips or plates is exactly one-half wavelength the wave is greatly accelerated. A honeycomb structure in the artificial ‘metal’ would be ideal for this purpose.

focal length

If one look at the graphic photo above one will see three sections of the bottom of the hull especially curved, and each of these curved sections because they are differently spaced from the wave generators have a different “focal length” (to use a photographic term), and because at different focal lengths the wave’s shape will be different as it enters the dielectric waveguide lens then the resultant wave produced by that lens-waveguide when that wave passes through it will also be different. Couple to this the fact that for every different angle that the waves pass through the dielectric hull a different effect of refraction will occur to the wave. Consider next that if this craft uses the two outer generators to focus their two microwave-beams at some finite point in the distance it would follow that to approach that same point in space the two beams will have traversed through a different thickness of the dielectric lens, and at a different angle, meaning that the two beams will be shaped slightly differently. If, then, it can be controlled how the two waves are shaped then it will also be possible to control their constructive and destructive interference pattern – and hence the strength or weakness of the electric field at the area where the two beams approach each other. And as you already know the stronger the electric field the stronger the repulsion – the stronger the acceleration.

0.9: Lazar And Element 115: The Gravity Waves

On 11th November 1989, viewers of KLAS-TV in Las Vegas, Nevada, heard an incredible story from news reporter George Knapp: A scientist had come forth to reveal that the U.S. government possesses the remains of extraterrestrial vehicles. From these vehicles have come extraordinary technological breakthroughs. The scientist, Robert Scott Lazar, said he had worked in the S-4 section of Area 51, a corner of the Nevada Test Site. There, he had read documents indicating the existence of ongoing research on an “anti-gravity reactor” for use in propulsion systems. He was astonished, he said, but he was even more shocked to be shown nine flying discs “of extraterrestrial origin” stored in a hangar. As part of the gravity-harnessing propulsion, the craft used an element, 115, unknown on Earth, because it is “impossible to synthesize an element that heavy here on Earth… the substance has to come from a place where super-heavy elements could have been produced naturally.”

Figure i: Robert Lazar claims to have studied extraterrestrial hardware at S4, Area 51.
Figure i: Robert Lazar claims to have studied extraterrestrial hardware at S4, Area 51.

The element 115 is machined into triangles like the one illustrated below and is used to power the reactor. It is used to create a reaction from being transmuted with an additional proton from 115 to element 116 which immediately decays and releases antimatter. But more importantly, when an element becomes so heavy as to have 115 protons and lands within an island of stability, the cumulative strong nuclear force or “Gravity A-wave” radiates or extends past the perimeter of the atom. We access this gravity and amplify it, lensing it to counter act the gravity naturally propagating outward from the earth. This is not “anti-gravity” and nor are we generating gravity from nothing as some theorists still believe. This element is then inserted into the reactor. This piece of element 115 is the source of the gravity-A wave as well as the target that is bombarded with protons to release the anti-matter. Only about 223 grams, which is just under a half pound is sufficient to operate the craft for 30 to 45 years.

Figure ii: Illustration of Element 115 commonly known as Ununpentium or Moscovium.
Figure ii: Illustration of Element 115 commonly known as Ununpentium or Moscovium.

– By virtue of the way Element 115 is used in the reactor, it depletes very slowly. A piece of 115 this size can be used as fuel in the disc’s reactor for twenty to thirty years.

– Element 115’s melting point is 1740 degrees Celsius.

– It’s standard oxidation state is +3.

– Atomic Radius: of Element 115 is 1.87 angstroms.

– Carrier Wave Frequency: 7.46 hz @ a one micron bandwidth.

The most important attribute of this heavier, stable element is that the gravity A wave is so abundant that it actually extends past the perimeter of the atom. These heavier, stable elements literally have their own gravity-A field around them, in addition to the gravity B field that is native to all matter. No naturally occurring atoms on earth have enough protons and neutrons for the cumulative gravity-A wave to extend past the perimeter of the atom so one can access it. Now even though the distance that the gravity-A wave extends past the perimeter of the atom is infinitesimal, it is accessible and it has amplitude, wave lengths, and frequency, just like any other wave in the electromagnetic spectrum. Once one can access the gravity-A wave, one can amplify it just like we amplify other electromagnetic waves. And in like manner, the gravity-A wave is amplified and then focused on the desired destination to cause the space/time distortion required for practical space travel. This amplified gravity-A wave is so powerful that the only naturally occurring source of gravity that could cause space/time to distort this much would be a black hole. We’re amplifying a wave that barely extends past the perimeter of an atom until its large enough to distort vast amounts of space/time.

Figure iii: Illustration by Tri-Dot Productions, 1996.
Figure iii: Illustration by Tri-Dot Productions, 1996.

Robert Lazar described from his work at the S-4 facility south of area 51 his exposure to the technology of alien space craft. Lazar described the fuel cell as a triangular shaped wedge made from a heavy metal element with a rounded tip. This metal shape was important to the creation and manipulation of gravity. Producing Gravity waves in both A and B allowed the alien space ships to manipulate gravity as well as create it. Element 115 is a theoretical element that up until a few years ago has never been created in a physics lab. Recently scientists were able to create element 115, yet only a few atoms that lasted less than a second. Lazar said that the US Government had a stock pile of this rare metal for her own use. This Alien artifact is an interpretation of what the US Airforce manufactured fuel cell would look like.

To be continued

Reposts are welcomed with the reference to ORIENTAL REVIEW.
Print Friendly, PDF & Email

    Leave a Reply